1.Introduction of stainless steel rope mesh

The Stainless Steel wire rope Ferruled Mesh, the wire ropes are neither knotted nor crossed, it is a construction based on stainless steel wire ropes that lie parallel in pairs connected and reciprocally curved by stainless steel ferrules. The wire rope construction is 7 x 7 or 7 x 19. The standard mesh angle is 60°. All the components are made from the AISI 304 or AISI 316 material group.
The construction of stainless steel cable netting can be pulled apart like an accordion and our stainless steel rope mesh are all stretched when they are used. Producing a spring force that varies depending on the mesh aperture and wire rope thickness. The Rope Mesh is a vibrant, premium-quality product : the mesh aperture ( variable, from very tight to very wide ) and the wire rope diameter ( 1.2mm,1.6mm, 2.0mm, 2.4mm, 3.2mm ) determine its functionality and aesthetics.
The stainless steel cable netting mostly be applied in the architecture.

2.Measurement of Feruled Mesh

Remark:

Height: vertical direction( the same direction with the longer aperture direction).
Width: horizontal direction( the same direction with the shorter aperture direction).
H Aperture: Longer aperture.
W Aperture: Shorter aperture

Usually the stainless steel rope mesh for architectural decoration is with aluminum alloy clips or stainless steel clips and the opeing angle usually is 60°. If you don't  specific point it, , we will produce it as our production rule.

3.Usage of stainless steel cable netting
Our stainless steel cable netting is widely used as ceilings, banister fillings, stair protections, mesh fence and so on.
Characteristics：

1. Made of high quality stainless steel wire rope
2. Material group: AISI 304, 304 L, 316, 316L
3. Soft to the touch, can't hurt hands.
4. Light weight, but strong
5. Life span more than 30 years
6. Environmental degradation resistant, say, corrosion, ultraviolet
7. Excellent flexibility for tough installations

 Stainless Steel Wire Rope Mesh ( Ferruled Mesh )

NOS

Wire Rope Construction

Min.Breaking Load

Wire Rope Diameter

Aperture

KN

Inch

mm

mm(W x H)

RMJ-3212F

7X19

7.23

1/8

3.2

120 x 208

RMJ-3210F

7X19

7.23

1/8

3.2

100 x 173

RMJ-3290F

7X19

7.23

1/8

3.2

90 x 156

RMJ-2410F

7X7

4.08

3/32

2.4

100 x 173

RMJ-2490F

7X7

4.08

3/32

2.4

90 x 156

RMJ-2480F

7X7

4.08

3/32

2.4

80 x 139

RMJ-2470F

7X7

4.08

3/32

2.4

70 x 121

RMJ-2010F

7X7

3.10

5/64

2.0

100 x 173

RMJ-2090F

7X7

3.10

5/64

2.0

90 x 156

RMJ-2080F

7X7

3.10

5/64

2.0

80 x 139

RMJ-2070F

7X7

3.10

5/64

2.0

70 x 121

RMJ-1680F

7X7

2.12

1/16

1.6

80 x 139

RMJ-1670F

7X7

2.12

1/16

1.6

70 x 121

RMJ-1660F

7X7

2.12

1/16

1.6

60 x 104

RMJ-1650F

7X7

2.12

1/16

1.6

51 x 87

RMJ-1280F

7X7

1.19

3/64

1.2

80 x 139

RMJ-1270F

7X7

1.19

3/64

1.2

70 x 121

RMJ-1260F

7X7

1.19

3/64

1.2

60 x 104

RMJ-1250F

7X7

1.19

3/64

1.2

50 x 87